Tag Archives: Make Sure

4 Typical Automated Door Repair Problems And How To Fix Them

Posted on by

If you are experiencing automated door repair problems then you might
want to take note of the most typical things that can go wrong so that
you can fix them quickly. These items range from garage doors to
swinging doors usually found in offices or retail stores. Identifying
the issue might help you to save money when it comes to repairing it.

My Remote Control Will Only Work When I Am Close To The Door

When this happens you will have to check the batteries in your remote.
If the batteries are flat then this could be the problem and you will
only need to change them to be able to access the doors from a further
distance. If there is something blocking the remote from the doors (such
as a car windshield) then you might want to try pressing the remote at a
different angle to see if this is the problem or not.

My Doors Only Open Halfway And Then They Stop

When this happens the first thing you need to do is check whether
something is blocking the doors from opening. If a spring is jammed then
it might be preventing the mechanism from working. You should also
check to see that the springs are oiled. If the mechanism is old and
rusty then it might be hindering the functioning of the opening
mechanism and this is a simple procedure to complete in order to help it
run smoothly.

My Doors Do Not Open And Close Smoothly

Over time you might begin experiencing automated door repair problems
and this can be due to the fact that the bolts loosen over time. In
order to resolve this problem you need to make sure that all of the nuts
and bolts are properly tightened and then check to see if the mechanism
is working once again. In order to make sure that you are tightening
the bolts correctly, make sure that the doors are closed when you begin
the process.

Rollers that are no longer working can also cause the automated door
repair issues. It will get stuck at certain points. In order to make
sure that all of the rollers are in good condition you will want to
inspect each of them. The easiest way to inspect rollers is to inspect
them while moving it up and down.

General Maintenance Problems

If you are having problems with the functioning of your doors then you
might want to check for rust. Rust can eat away at precious coils, nuts
and bolts and this can cause them to malfunction. If you want to make
sure that no future damage occurs then you will want to check thoroughly
for rust and replace any parts that are damaged in order to get your
mechanism working once again.

Calling In The Professionals

If you have been through your owner’s manual and you cannot find the
problem then you should call automated door repair professionals to help
you find and solve the problem. Automated door repair can be tricky to
do by yourself, so make sure your doors are in good hands.

If you’re needing an automatic
door repair new york specialist, do not hesitate to hire one
that is experienced and can repair effectively. Check out one company
and their services here: http://www.mackenziedoor.com

Do You Need To Switch From A Tape Backup System To A Disk Backup System

Posted on by

Tape backups for the most part are not very dependable at all. Even the slightest bit of dust on the tape can ruin them so they need constant checking to make sure they are usable. Imagine loosing all of the essential data that you have spent your time to back up only for it to get broken.

There are numerous more up-to-date ways of saving your invaluable info so don’t always rely on your tape backup. It is not unusual to find out your tape backup has recorded non-of your critical data, in fact it sometimes blank. If you are presently using a tape backup as your method of backing up your information then its critical that you make sure that you have actually been backing it up. It’s essential to make sure your equipment is kept clean as dirty tapes can cause many problems. You might be in for a nasty shock if you have been doing lots of backups and you find the tape has not been saving your info.

Using a tape backup is not one of the best ways to save data, so I would suggest that you look for some alternatives. There are lots of ways you can save your data, for example, flash drives, online backup or external disk drives. There is no reason that you should use any type of tape backup when there are numerous more up-to-date ways to save your invaluable data.

There is nothing worse than finding that you in reality have not saved all your files and folders, and this is from first-hand experience. And it wasn’t my home Mac that this happened with it was my business PC and it caused me to lose a lot of my time and way to much cash. What makes me so wild is that I did everything that I was suppose to do like making sure everything was kept clean, and even executed the checkups as I was told that I needed to do.

Using reliable backup systems like external disk drives or other online service would be in the best interests of your commercial enterprise. These are much better solutions then using a tape backup.

A simple search on one of the major search engines will back up my theory that’s it is not just to me who has had problems with tape backup.

P Abbey owns and runs http://www.tapebackupideas.com Tape backup

How to Fix Common PC Problems – Read More About It

Posted on by

If you are using Windows and you are experiencing some problems on your computer, do not call customer support just yet. If you know a thing or two about troubleshooting, you may be able to fix the problem yourself. Here are some ways on how to fix common PC problems and save you some money.

* If your computer does not shut down fast enough, you may have a problem with your page file. It is a file on your hard drive that stores excess data from your RAM. It can slow down shut down if it is set to be cleared during this time. To fix this problem, you should open your Registry Editor. Then, go to “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management and search for “ClearPageFileAtShutdown”. If you see that it is enabled, meaning that its value is set to 1, you should disable it by changing its value to 0.

* If your computer freezes, you may have a problem with the system process. It can be difficult to track down the cause of the problem in Windows because no details are shown. So if you want to obtain information, you should type in “regedit.exe” and open your Registry Editor. Then, go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem. You will see “VerboseStatus” at the right side. Make sure that its value is set to 1. You have to create “VerboseStatus” if you cannot find it, and set its value to 1. Once you see the necessary information, you will be able to fix the problem.

* If your computer wakes up when you have already put it to sleep, you should type in “cmd” and then “powercfg – lastwake” to display the most recent hardware device that caused your computer to wake up. If this did not work, you should type in “powercfg -devicequery wake_armed” to see which devices are permitted to wake your PC. Then, open your Device Manager and look for the devices that match what your command line has displayed. When you found the device, open Properties and go to Power Management. Uncheck the option that says “Allow this device to wake the computer”.

* If you are still having problems with your computer waking up, you should check out your software. Go to Power Options and open the power plan of your computer. Click on “Change advanced power settings” and continue scrolling downwards until you see the Sleep tree. When you see it, you should expand and disable it.

* If your computer keeps restarting, you should get the most recent Windows updates. Update all your important drivers, such as your motherboard, network card, and graphics card. If you are still having problems, there might be viruses such as adware in your computer. Your problem may also be caused by overheating. Most of the time, computers restart frequently when they run resource-intensive video games or programs.

* If your download speeds are slow, you should run a speed test on your computer. Ideally, your download speed should be at least fifty percent of the advertised speed of your Internet service provider. It should also have a ping under one hundred milliseconds. If you do not see anything wrong with the speed, you should inspect your network hardware. Try to download a new driver for your network card and reset your modem and router.

* If your computer is slow, you should check if you still have sufficient space on your hard drive. If there is not enough space, you should get rid of junk files, temporary files, duplicate files, and other unimportant data. You can also get a registry cleaner to make the clearing process easier, as well as to help you prevent DLL errors in the future. You can also use the System Configuration tool of Microsoft to track the performance of your computer. Make sure to reduce your startup items. Type in “msconfig” and press Enter.

* If you do not hear a sound from your computer, you should go to Sound and change the settings. If you have speakers, make sure to make Speakers your default device. On the other hand, if you want to connect to a display with speakers through HDMI, you should choose HDMI Output as your default. If you still experience the same sound problem, you should check your drivers. You may need to download a new driver for your device.

It is not that difficult to learn how to fix common PC problems. However, if you are not really confident about your abilities, you should ask a professional technician for help. If you have never troubleshoot a computer before, trying to fix the problem yourself may just make things worse.

If you are looking for a dll download to restore missing corrupted files, you can download for free on http://www.dlltool.com/

Microwave Ovens & Healthfulness Of Microwaved Food

Posted on by

While there is not enough evidence to require warning labels on microwave ovens, or to remove them from the market, there is concern both about the safety of our exposure to microwaves and the healthfulness of microwaved food.

THE DANGERS OF MICROWAVES

Even microwave ovens that are functioning perfectly emit microwaves. Safety standards set by the US Food and Drug Administration (FDA) allow microwave emissions of up to one milliwatt per square centimeter (1mW/cm2) when the oven is purchased, and up to 5mW/cm2 after the oven has been in use. Studies on industrial exposure recommend that daily exposure should not exceed one milliwatt for more than one minute. Average home use of microwave ovens far exceed this.

Workers who are exposed to microwaves on the job experience headaches, fatigue, irritability, sleep disturbances and other symptoms.

HOW MICROWAVES AFFECT FOOD

Advocates of microwaved food claim that it is healthier because it retains vitamins, but the University of Minnesota disagrees:

“Microwaves … are not recommended for heating a baby’s bottle…Heating the bottle in a microwave can cause slight changes in the milk. In infant formulas, there may be a loss of some vitamins. In expressed breast milk, some protective properties may be destroyed…. Warming a bottle by holding it under tap water or by setting it in a bowl of warm water…is much safer”.

If heating formula in a microwave can cause it to lose vitamins and protective properties in breast milk to be destroyed, then it can do the same to the foods we eat. While the effects may not be immediately observable, a regular diet of microwaved food may have long-term health consequences.

Two Swiss researchers found that microwave cooking changes food nutrients significantly. Blood samples taken from eight individuals immediately after eating microwaved food revealed, among other things, an increase in the number of white blood cells–often a sign of poisoning.

Safety tips for using microwave ovens

I personally have never had a microwave oven in my own kitchen and am finding that it had been difficult to get people to give up their microwave ovens. Some of the generation who grew up with microwave ovens apparently don’t know any other way to heat food (really!).

If you choose to use a microwave oven, Consumer Reports magazine suggests you stay as far as possible from the oven while it is in operation.

In addition, operate and maintain the oven in ways that minimize leakage:

* make sure the oven door closes properly
* prevent damage to hinges, latches, sealing surfaces and the door itself, and make sure these are in good working order
* make sure no soil or food residues accumulate around the door seal
* avoid placing objects between the sealing surfaces.

For peace of mind, test your oven for leakage. Testers can be purchased online.

When cooking in a microwave, use heat-resistant glass, not plastic. The Food Safety Inspection Service (FSIS) of the USDA warns against using foam trays, plastic wraps, and cold-storage containers such as margarine tubs, whipped-topping bowls and cottage cheese cartons. According to the FSIS flyer “A Microwave Handbook,” these containers “are not heat stable at high temperatures. They can melt or warp from the food’s heat, possible causing chemicals to migrate into the food.”

Read more about microwave ovens, the healthfulness of microwaved food, and where to purchase microwave oven testers at
http://www.debraslist.com/food/aboutmicrowaveovens.html

Hailed as “The Queen of Green” by the New York Times, Debra Lynn Dadd has been a consumer advocate for products and lifestyle choices that are better for health and the environment since 1982. Visit her website– http://www.debraslist.com –for 100s of links to 1000s of nontoxic, natural and earthwise products, and to sign up for her free email newsletters.

Tipping Toward Training Success With 6-Sigma

Posted on by

Every growing and successful business needs good tools to help them achieve the next level of success. Training, especially Six Sigma Training is the secret asset for any business in any industry, regardless of size. It would be well worth the time to investigate Six Sigma Projects and training for your company.

Six Sigma Training is expensive. Therefore, the first and most critical thing that you can do to help your business is to make sure that you choose the right training program for your specific needs. It doesn’t matter which program you use or whether it’s online or in a classroom, as long as it suits the needs of your business and your intended use for Six Sigma. Just about all training programs will teach the same basic concepts about Six Sigma, but some will offer you more information or a better rate on their programs, depending on what you find. Make sure that you invest the effort to find the best Six Sigma Training program for you.

With the cost of upgrading the different processes your business uses to produce your product on the rise, it is very important what you are facing to make these improvements. If you are unsure about the training you will need for your own employees, you might want to find a team not associated with your company to do a couple of the projects you need done to see if you can justify the training or the expense. One of the things you will need to find out is, how much you will need the training, of if the training will be regularly or only be needed every once in a great while or maybe never again. Just this tip alone could save you many hours and many dollars.

Actual execution of a process is a very effective tool for teaching anyone. It is especially effective for the Six Sigma Projects which are very in-depth and bring to light much detail. This is also important for everyone involved, to make sure they are properly trained. Utilizing the insight, knowledge and understanding of the process owner and having them present and a part of the training, will benefit tremendously the decisions about the improvements. Knowing how all the parts work and fit together and how to best make changes will save you valuable resources. This will undoubtedly make the Six Sigma Projects more valuable.

Six Sigma is a very specific methodology. As such, there is a lot to learn and plenty to think about before you can jump into your next project. However, if you take the time to pursue the best Six Sigma Training and ensure that all of the employees and team members are involved as they should be, it will be much easier to succeed. It doesn’t have to be complicated to figure out Six Sigma Projects as long as you invest the time to learn.

There are loads of projects that 6 sigma training can
assist with. Having your employees learn about lean six
sigma can only make business better.

Microwave Ovens & Healthfulness Of Microwaved Food

Posted on by

While there is not enough evidence to require warning labels on microwave ovens, or to remove them from the market, there is concern both about the safety of our exposure to microwaves and the healthfulness of microwaved food.

THE DANGERS OF MICROWAVES

Even microwave ovens that are functioning perfectly emit microwaves. Safety standards set by the US Food and Drug Administration (FDA) allow microwave emissions of up to one milliwatt per square centimeter (1mW/cm2) when the oven is purchased, and up to 5mW/cm2 after the oven has been in use. Studies on industrial exposure recommend that daily exposure should not exceed one milliwatt for more than one minute. Average home use of microwave ovens far exceed this.

Workers who are exposed to microwaves on the job experience headaches, fatigue, irritability, sleep disturbances and other symptoms.

HOW MICROWAVES AFFECT FOOD

Advocates of microwaved food claim that it is healthier because it retains vitamins, but the University of Minnesota disagrees:

“Microwaves … are not recommended for heating a baby’s bottle…Heating the bottle in a microwave can cause slight changes in the milk. In infant formulas, there may be a loss of some vitamins. In expressed breast milk, some protective properties may be destroyed…. Warming a bottle by holding it under tap water or by setting it in a bowl of warm water…is much safer”.

If heating formula in a microwave can cause it to lose vitamins and protective properties in breast milk to be destroyed, then it can do the same to the foods we eat. While the effects may not be immediately observable, a regular diet of microwaved food may have long-term health consequences.

Two Swiss researchers found that microwave cooking changes food nutrients significantly. Blood samples taken from eight individuals immediately after eating microwaved food revealed, among other things, an increase in the number of white blood cells–often a sign of poisoning.

Safety tips for using microwave ovens

I personally have never had a microwave oven in my own kitchen and am finding that it had been difficult to get people to give up their microwave ovens. Some of the generation who grew up with microwave ovens apparently don’t know any other way to heat food (really!).

If you choose to use a microwave oven, Consumer Reports magazine suggests you stay as far as possible from the oven while it is in operation.

In addition, operate and maintain the oven in ways that minimize leakage:

* make sure the oven door closes properly
* prevent damage to hinges, latches, sealing surfaces and the door itself, and make sure these are in good working order
* make sure no soil or food residues accumulate around the door seal
* avoid placing objects between the sealing surfaces.

For peace of mind, test your oven for leakage. Testers can be purchased online.

When cooking in a microwave, use heat-resistant glass, not plastic. The Food Safety Inspection Service (FSIS) of the USDA warns against using foam trays, plastic wraps, and cold-storage containers such as margarine tubs, whipped-topping bowls and cottage cheese cartons. According to the FSIS flyer “A Microwave Handbook,” these containers “are not heat stable at high temperatures. They can melt or warp from the food’s heat, possible causing chemicals to migrate into the food.”

Read more about microwave ovens, the healthfulness of microwaved food, and where to purchase microwave oven testers at
http://www.debraslist.com/food/aboutmicrowaveovens.html

Hailed as “The Queen of Green” by the New York Times, Debra Lynn Dadd has been a consumer advocate for products and lifestyle choices that are better for health and the environment since 1982. Visit her website– http://www.debraslist.com –for 100s of links to 1000s of nontoxic, natural and earthwise products, and to sign up for her free email newsletters.

Medical Alarm Systems

Posted on by

There are several types of medical alarms. Depending on your needs, they can differ drastically in terms of price, service, and how they work. When choosing a medical alarm you must first look at the company and the services they provide. How reliable is their equipment? Do they offer 24 hr assistance? How fast is their response? These are just a few of the questions you have to ask yourself before determining what service to go with.

Most medical alarms or Personal Emergency Response Systems (Pers) are connected to your existing phone line with a special 2 way monitoring device or control box. The console uses a very loud speaker and sensitive microphone so you’ll be able to be heard wherever you are in the house. Most alarms feature a wireless, single button, water proof, device (normally you have a choice between a necklace or wrist strap) that interacts with the console when help is needed. The control box, located near the telephone, will immediately call or notify (when the emergency button is pressed) a trained professional who returns the call to the patient or contacts the appropriate parties. If there is no answer, help will be dispatched. Depending on the situation, a friend, relative or ambulance is summoned. Medical alarms are great for expecting mothers, the elderly, handicapped, or diabetic patients.

There are also medical alarms that can be attached to your existing burglar or security alarm. If you have an existing alarm we suggest contacting your service company to see if they provide a medical alarm as well. Keep in mind that in this situation you’ll have to verify how reliable their service is since they do not specialize in medical emergencies (however maybe they do). Make sure to ask.

Questions to ask when purchasing a medical alarm service.

* How fast is the response?

* Does the console have a rechargeable battery?

* Is the console attached to your existing phone line?

* What if the phone is busy during an emergency?

* Is the wireless transmitter waterproof?

* Is there a guarantee on parts, labor, and services?

* How far can the transmitter communicate with the console?

* What is the monthly fee?

* How is the response team trained?

* Any other charges. Setup, Activation, or Termination Fees?

* How reliable is the response teams equipment, computer systems?

Below is a publication from the National Center for injury prevention and control of the Centers for Disease control and prevention.

Falls are often due to hazards that are easy to overlook but easy to fix. The checklist below details hazards found in each room of your home. For each hazard, the checklist tells you how to fix the problem.

Safety Tips

* Keep emergency numbers in large print near each phone.

* Put a phone near the floor in case you fall and can’t get up.

* Think about wearing a Medical Alarm that will bring help in case you fall and can’t get up.

Floors – Look at the floor in each room.

* When you walk through a room, do you have to walk around furniture? Ask someone to move the furniture so your path is clear.

* Do you have throw rugs on the floor? Remove the rugs or use double-sided tape or a non-slip backing so the rugs won’t slip.

* Are papers, magazines, books, shoes, boxes, blankets, towels, or other objects on the floor? Pick up things that are on the floor. Always keep objects off the floor.

* Do you have to walk over or around cords or wires (like cords from lamps, extension cords, or telephone cords)? Coil or tape cords and wires next to the wall so you can’t trip over them. Have an electrician put in another outlet.

Stairs and Steps – Look at the stairs you use both inside and outside your home.

* Are papers, shoes, books, or other objects on the stairs? Pick up things on the stairs. Always keep objects off the stairs.

* Are some steps broken or uneven? Fix loose or uneven steps.

* Are you missing a light over the stairway? Have a handyman or an electrician put in an overhead light at the top and bottom of the stairs.

* Has the stairway light bulb burned out? Have a friend or family member change the light bulb.

* Do you have only one light switch for your stairs (only at the top or at the bottom of the stairs)? Have a handyman or an electrician put in a light switch at the top and bottom of the stairs. You can get light switches that glow.

* Are the handrails loose or broken? Is there a handrail on only one side of the stairs? Fix loose handrails or put in new ones. Make sure handrails are on both sides of the stairs and are as long as the stairs.

* Is the carpet on the steps loose or torn? Make sure the carpet is firmly attached to every step or remove the carpet and attach non-slip rubber treads on the stairs.

Kitchens – Look at your kitchen and eating area.

* Are the things you use often on high shelves? Move items in your cabinets. Keep things you use often on the lower shelves (about waist high).

* Is your step stool unsteady? Get a new, steady step stool with a bar to hold on to. Never use a chair as a step stool.

Bedrooms – Look at all your bedrooms.

* Is the light near the bed hard to reach? Place a lamp close to the bed where it is easy to reach.

* Is the path from your bed to the bathroom dark? Put in a night-light so you can see where you’re walking. Some night-lights go on by themselves after dark.

Bathrooms – Look at all your bathrooms.

* Is the tub or shower floor slippery? Put a non-slip rubber mat or self- stick strips on the floor of the tub or shower.

* Do you have some support when you get in and out of the tub or up from the toilet? Have a handyman or a carpenter put in a grab bar inside the tub and next to the toilet.

Other Things You Can Do To Prevent Falls

* Exercise regularly. Exercise makes you stronger and improves your balance and coordination.

* Have your doctor or pharmacist look at all the medicines you take, even over-the-counter medicines. Some medicines can make you sleepy or dizzy.

* Have your vision checked at least once a year by an eye doctor. Poor vision can increase your risk of falling.

* Get up slowly after you sit or lie down.

* Wear sturdy shoes with thin, non-slip soles. Avoid slippers and running shoes with thick soles.

* Improve the lighting in your home. Use brighter light bulbs (at least 60 watts). Use lamp shades or frosted bulbs to reduce glare.

* Use reflecting tape at the top and bottom of the stairs so you can see them better.

* Paint door sills a different color to prevent tripping.

MedScope Personal Emergency Response Systems offers affordable, effective medical alarm systems. To find out more, go to www.medscope.org or call us at 1800-645-2060

New Parts For Your Old Heating And Air System

Posted on by

For Heating Parts, the Do-It-Yourselfer in us wants to tackle installing replacement parts to save money. This can be a fools errand, as HVAC equipment is inherently very dangerous. It may also be illegal in your locale to perform this work. You are certainly opening yourself up to liability should you ever sell your home and there are subsequent problems.
This discussion is for those who are completely qualified and/or licensed as applicable to your local laws.

If you are qualified and are going to proceed, the first thing to find out is where you find the proper parts. Most heating and air conditioning parts has generic replacements which are perfectly serviceable. A qualified HVAC technician would make sure to replace parts that are the exact matches of the original. This applies to every specification including horsepower, voltage, amperage, shaft lengths, diameter and ratings. If you have a connection, parts are available from nationwide wholesalers like Johnstone Suppy or Graingers. If you live near a city of any size, a quick Google search of (“appliance parts “my city”) will yield the results of local stores which will sell such parts to individuals. Make sure you bring the part with you, so that you can insure an exact replacement.

If you are changing out blowers, a variable one is a nice choice. It should be considerably quieter, more comfortable and more economical than a single speed blower. Blower motors going bad is a common occurrence. Replacement is one of the easier jobs for a heating and air conditioning professional to do.

Make sure you have the capacitor replaced at the same time. Capacitors are typically only $10-$15 and go bad all the time. They get fried with power surges. In fact, in many cases you may not need a motor at all, just a capacitor replacement. Capacitors carry an electric charge, even when disconnected and you can get a nasty shock if you do not know what you are doing. If your air conditioner compressor is running and your outside fan is not, or if the fan starts, then stops or turns slowly, your capacitor is the first thing to replace.

Blower wheels themselves can be a problem source. Axles crack and these wheels come off – binding in the process and wrecking havoc. This can be the issue instead of the motor, but a dislodged wheel can cause the motor to burn out and you will need to replace both.

It is amazing the amount of parts that the supply houses have for units going back for years and years. Things like gas valves are readily available, as are ceramic ignition coils and thermocouples. If replacing a ceramic ignition coil make absolutely sure that the power is off. The ceramic will not look hot, yet it will instantly sear your skin into a third degree burn.

When buying a new unit, make sure that you do not buy one with a polypropylene secondary heat exchanger. Units on the market with this have experienced numerous problems. The heat exchanger is key, because if it cracks, it will pump deadly carbon monoxide (CO) gas into your home. Always have a live CO detector in your home, because these heat exchangers can fail without warning and without indication that they have failed.

An expensive replacement are evaporator coils. Check the reputation of your brand of choice, because some makers are notorious for having leaky coils. Freon is ridiculously expensive to replace. Typically, it is $400 plus labor. Make sure of your evaporator coils before you ever buy a unit.

These are some of the parts which you can manage if you are a qualified professional. If you have any doubts, contact your friendly local service professional for help. Some may even let you supply the heating parts, if you are willing to waive the warranty on their work.

You will find more great Heating and Air Conditioning Secrets at: Charlotte Heating
Service Area Center: CharlotteHeating.Org, 100 E. Trade St., Charlotte, NC 28202
For Additional Heating Parts Information: Charlotte Heating Parts

Water Softening: Reduce the Impact of Hard Water

Posted on by

Water softening can help remove the excess chemicals in your h20. These chemicals can make it more difficult for you to do your laundry. In other words, the laundry detergent that you have probably won’t dissolve as easily in the hard h20 than in softer h20. You can save on laundry detergent and bathe in h20 that does not contain excess minerals.

The softeners can help reduce the level of the minerals in your h20. When you decide to have your h2o treated, you should discuss the type of treatment with the representative. You should also ask questions related to the total price for the treatment. Each type of treatment has varying costs. You can have a treatment for your bath or laundry h2o or you can see if the company will provide the service for your drinking h20. You should keep in mind that when you have the treatment, it will reduce the minerals in your h20, therefore, if you choose to have completed for your drinking h20, you will not be able to necessarily have mineral enriched h20. Many people are concerned about their sodium intake and they are afraid that the treatment will increase the level of sodium.

In addition to acquiring sodium from h20, you might also intake it from eating pre-packaged foods and fast foods. Usually the amount of sodium that is placed in your h20 to make it softer does not have a great impact in the amount that you consume regularly on a daily basis. You could, however, as the company for details related to the sodium that might be added to your h20. Make sure that the company gives you a specific amount. Tell the representative that you need to know the amount for medical purposes. You can then take this amount to your doctor and determine if it will actually impact your health over time.

You can also determine whether or not the process will need major upkeep. Ask the company if specific parts that are used will need to be replaced and how often they should be replaced. You would want to know the monetary investment associated with the process. Depending on the type of treatment, you will need to know if your current pipes are appropriate for the process. You also would want to know if your pipes will need to be changed and the monetary investment associated with that. Septic tank users, should feel free to ask the representative whether or not their septic tank will be impacted after water softening.

Above all, you should make sure that the company that is providing the water softening services is experienced and that the installers are qualified. You should also make sure that the installers are reliable and will complete the job when they say that they will complete it. Ask your friends or family recommendations for recommendations or read reviews on various companies online. Oftentimes reviews from real people will give you an idea of whether or not you would like to hire the company for the services.

Don’t be hard on your pipes, contact a professional today about water softening Chicago. For a company that will get the job done right visit: www.waterfiltrationchicagoland.com.

The Best Way To Use Autoresponders For Networking And Prospecting

Posted on by

If you are a network marketer, you will need an autoresponder even more than the average business owner. You might not think that you do, but today you’re about to learn the brutal truth about the importance of using auto responders as network marketing and prospecting tools. The reason this is so true, is because as a business owner, you will have to follow up with all of your network marketing prospects at least 5 to 7 times before you even start to get their attention. The decision to buy or join an opportunity is influenced by the personal relationship that you develop with prospects.

Today, I’m going to share with you some of the best tips I know that will help you close hot network marketers that are on the fence. Please understand, that you will be learning from someone who has made over a 1/2 million in network marketing over the years. Yes, I also know that there are people out there who have made a lot more than that. But my point is, that I’ve made arguably more than my fair share, so I have a lot to teach you in my humble opinion.

The first thing you need to do, is make sure that all of your follow-ups relate to each other in topic. What I mean by this, is that you need to make sure that follow-up #1 talks about what follow-up #2 will end up saying. Follow-up #2 shouldn’t briefly mention at the end of the follow-up what follow-up #3 will be about. What I’m trying to say here, is that every follow-up should lead to another similar type of follow-up. In order to do this, you need a follow-up autoresponder that will allow you to send unlimited messages.

The next tip, is to create your follow-ups in text format if you are a network marketer. Yes, certain industries like retail stores would benefit more from HTML messages, because they need the messages to look fancy and glitzy. However, as a network marketer, your only objective is to relay solid and understandable information to your prospect. Also, make sure that each line doesn’t extend out any more than 60 characters. If you do, many recipients will have to scroll to the right just to read your message. In my opinion, that looks very tacky and unprofessional.

Another big mistake I see network marketers make while they’re trying to use an autoresponder, is that they don’t structure their outbound links properly. You should either say click here so the recipient understands that they need to click the link in the e-mail, or enter the entire URL, and make that URL clickable. These are very simple things in theory, but most people don’t do it and it will hurt your e-mail follow-up campaigns. Another thing most people don’t do, is hit the enter button about 20 times after they type in their message. By doing this, you push your unsubscribe link way down, so people will really have to look for your unsubscribe link to get off your list.

Yes, you always want to make it as difficult as possible for someone to get off your e-mail list, but of course you always need to stay legal in the process. Some of the most successful e-mail campaigns I’ve written, follow-up with each lead about every three days. However, I always like to focus on trying to get that lead to take a very specific action. One of the most common actions I’ll try to get them to take, is to get them on a free webinar or get them to fill out a form. We use Aweber Autoresponder’s, and these allow us to make custom web forms as well as just capture e-mail leads.

Some of the best advice that I can give an up-and-coming network marketer, is to use an autoresponder service that is evergreen, only allows double opt-in and that stores leads on their server and not yours. The reason this is so paramount, is because leads you store on your own server can vanish forever, or incur a back-up screw-up by an irresponsible hosting service. Please understand, that even responsible hosting services make honest mistakes.

Another trick when using auto-responders for prospecting, is to go after a very specific group of people. What I’m saying here, is go after almost a tribe like group. For example, let’s say you are in a company that sells products that can be used at fitness clubs. You might want to set up a landing page that caters to personal trainers or owners of fitness clubs, offering them a series of free reports for subscribing to your newsletter. This is commonly done by offering a seven report series of some sort. Just don’t get overzealous, and offer too much free information. Just give them enough so they can start wagging their tail, and force them to contact you for everything else.

Let Brian Garvin teach you everything you need to know about how to use Autoresponders For Network Marketing And Prospecting.